Reading And Presetting The Ink Fountain Key Opening Volume Data - Ryobi 3302H Operation Manual

Chapter 1 RYOBI PCS-F
I
4. Reading and Presetting the Ink Fountain Key Opening Volume Data
I
The data read from the floppy disk will be presetted to move the ink fountain keys.
IO
8-'"o_E_-;:::11======2=====3======4===A
=:5======6====:7====: 0 =:8~~ ~§~
UNITDA D D D D D D .
K L M
F
1;
~:L--~-~-~--~-:--~-:--~-:--~- 0 --~--~---J ~~~
1 2 3
~~ _o~_oc_K_G~~L~~=sc~o_j~I=======P======='~'~~YE~s-Q~~=No~~~:--~_=~
1. Check that each button (H through M) on the ink fountain preset panel, ink fountain key 0 point reset button (E), and
lock button (G) are OFF.
2. Insert the floppy disk with the saved data and push the data reading button (M).
SELECT DATA AND PRESS YES KEY
•
l 2 3 4
IL__ ______
The job No. of the saved data is indicated.
For example, the job No. from 1 to 4 is inputted.
3. Move the cursor by using the~ or
8
button of the number input buttons (N). After selecting the data you want to
read, push the~ button. For example, select the job No. 2.
2 READING COMPLETE. START OK?
YES OR NO
4. Push the~ button.
5. The unit selection button (F) lamp will light in order and preset the ink fountain key opening volume on each unit to
the data read.
During presetting, the following message is indicated on the message display (P).
SETIING NO.* UNIT INK KEY
Optional Accessories Edition - 12