Ryobi 3302H Operation Manual page 225

J.
Data clear button
When pushing this button, the lamp will light. This
is used to clear the data on the floppy disk.
K. Color/conversion curve number set button
When pushing this button, the lamp will light. This
is used to input the color and conversion curve
number to each unit.
When inputting the data of the device for measuring
image area of plate (DEMIA), ink volume setter, or
ink volume setter- CIP3, the conversion curve
number is used.
L.
Data saving button
When pushing this button, the lamp will light. This
is used to save the data for each unit on the floppy
disk.
M. Data reading button
When pushing this button, the lamp will light. This is
used to read the data on the floppy disk.
N. Number input button
This is used to input the job No. when saving the
data on the floppy disk.
Also this is used to input the color and conversion
curve number on each unit.
0. Reset button
This is used to release the button operation (H
through M) on the ink fountain preset panel and the
button operation of the ink fountain key 0 point reset
button (E).
P. Message display
The next operation message is displayed.
Chapter 1 RYOBIPCS-F
Q. YES/NO button
When pushing the ~ button according to the
message on the message display (P)t:bou can go to
the next process. When pushing the
~
button, you
can return to the preceding process.
Optional Accessories Edition - 7