Ryobi 3302H Operation Manual page 83

A. Magnifying glass
There is a register mark in the magnifying glass.
Align it with the plate register mark position.
B. Lateral positioning pin
Contact the pins on the plate edge lightly to set the
lateral position of the plate.
C. Magnifying glass block fiXing knob
This knob is used to fix the magnifying glass block.
D. Vertical image micro adjustment knob
This knob is used to do the micro adjustment of the
plate in the vertical direction.
E. Punch lever
When pushing the lever down, 2 punch holes are
made in the plate.
Chapter 2 Names and Functions
F. Lateral image micro adjustment knob
This knob is used to do the micro adjustment of the
plate in the lateral direction.
G. Slide bar vertical image micro adjustment
knob
This knob is used to do the micro adjustment of the
slide bar in the vertical direction.
H. Magnifying glass lateral image micro
adjustment knob
This knob is used to do the micro adjustment of the
magnifying glass in the lateral direction.
I. Slide bar fixing knob
This knob is used to fix the slide bar.
J.
Lamp
This lamp lights when the metal plate is set correctly.
Introduction Edition- 45