Chapter 6 Safety Devices
Safety bar
The safety bars are mounted to protect the fingers and rags from the danger of being caught in the press, when
doing work on the plate cylinder, blanket cylinder, impression cylinder, and parts around them while they are
rotating.
When a safety bar actuates, the press will stop immediately and the press cannot be run and crawled. When the
safety bar is reset in the former position, the press can be run and crawled.
The safety bars are located at the positions shown in the illustration below.
I
Press without Semiautomatic Plate Changer
I
First unit
Safety bar
I
Press with··.Semiautomatic Plate Changer
I
First unit
Safety Operation Edition - 21