4
SETUP AND PROCEDURES BEFORE OPERATION
4.2 Setup and Procedures before Operation
Module mounting
Mount the A/D converter module in the specified
slot.
Wiring
Wire external devices to the A/D converter module.
Intelligent function module switch settings
Perform settings using GX Developer
(see Section 4.5).
Offset/gain setting
Initial setting and auto refresh setting
The program can be simplified if the utility
package is used for setting (see Chapter 5).
Programming and debugging
Create and check the sequence program.
4 - 2
Start
Use user range settings?
Use user range settings
If user range settings are used, perform the
offset and gain settings (see Section 4.6).
Use the utility package?
YES
Use industrial shipment
settings
NO
MELSEC-Q
4
4 - 2