Mitsubishi MELSEC Q Series User Manual page 133

5 UTILITY PACKAGE (GX Configurator-AD)
5 - 15
[Explanation of items]
(1) Setting contents
Set A/D conversion enable/disable, averaging process specification and others
for each channel.
(2) Command buttons
Make text file
End setup
Cancel
POINT
Initial settings are stored in the intelligent function module parameters. After being
written to the CPU module, the initial setting is made effective by either (1) or (2).
(1) Cycle the RUN/STOP switch of the CPU module: STOP
RUN.
(2) With the RUN/STOP switch set to RUN, turn off and then on the power or reset
the CPU module.
When using a sequencer program to write the initial settings, when the CPU is
switched from STOP to RUN the initial settings will be written, So ensures that
programming is carried out to re-execute the initial settings.
Creates a file containing the screen data in text file format.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
MELSEC-Q
RUN STOP
5 - 15