7
ONLINE MODULE CHANGE
7.2 Online Module Change Operations
CPU operation
: Executed
FROM/TO
X/Y
Dedicated
instruction
refresh
instruction
1
1: Access to the intelligent function module device (U \G ) is included.
2: In the absence of the operation marked
3: With the input range set as shown below, online module change with a module that does not support the analog input range extended
mode causes an intelligent function module switch error.
For the Q64AD-GH: 4 to 20mA (Extended mode): A
1 to 5V (Extended mode): B
For the Q62AD-DGH: 4 to 20mA (Extended mode): A
7 - 3
The following gives the operations performed for an online module change.
: Not executed
GX Configurator
Device
Initial
Monitor/
test
setting
test
parameter
2, the operation of the intelligent function module is the operation performed prior to that.
H
H
H
(User operation)
MELSEC-Q
(Intelligent function module
operation)
7 - 3