5 UTILITY PACKAGE (GX Configurator-AD)
5 - 8
Steps 1) to 3) shown in Figure 5.1 are performed as follows:
1) From GX Developer, select:
[Project]
[Open project] / [Save]/ [Save as]
2) On the intelligent function module selection screen of the utility, select:
[Intelligent function module parameter]
parameters]
3) From GX Developer, select:
[Online]
[Read from PLC] / [Write to PLC]
module parameters"
Alternatively, from the intelligent function module selection screen of the
utility, select:
[Online]
[Read from PLC] / [Write to PLC]
MELSEC-Q
[Open parameters] / [Save
"Intelligent function
5 - 8