Mitsubishi MELSEC Q Series User Manual page 235

APPENDIX
Appendix 3 Functions Added or Changed Due to Version Upgrade
Added or changed
function
When the following input ranges are selected
in the intelligent function module switch setting,
the analog input ranges can be extended.
• 4 to 20mA (Extended mode)
Analog input range
• 1 to 5V (Extended mode)
extended mode
The input ranges supported by the analog
input range extended mode cannot be used for
products of incompatible version.
When the warning of input signal error
detection is enabled, the input signal error
detection can be performed by setting the
same value of upper and lower limit or different
value of upper and lower limit.
The input signal error detection cannot be
performed by setting the different value of
Input signal error
upper and lower limit, but can be performed by
detection extended
setting the same value of upper and lower
setting
limit.
Set the buffer memories as follows.
Buffer memory address 47: Un\G47.b15 to b12
• • • Fixed at 0
Buffer memory addresses 142 to 145:
Un\G142 to Un\G145 • • • Reserved (system
area)
APP -15
The A/D converter has been upgraded with new functions and specifications.
The functions available for use of the A/D converter module vary with the first five
digits of product number.
Also, use the GX Configurator-AD whose version number is compatible one or later.
(1) Q64AD-GH
Table Appendix 2 Q64AD-GH
Description
Applicable version
First 5 digits of GX Configurator-
product number AD
10062 or later 2.09K or later
10062 or later 2.09K or later
MELSEC-Q
Reference
section
Section 3.1.1
Section 4.5
Section 3.2.3
Section 3.4.12
Section3.4.20
APP -15