Mitsubishi MELSEC Q Series User Manual page 236

APPENDIX
Added or changed
function
When the following input ranges are selected
in the intelligent function module switch setting,
the analog input ranges can be extended.
Analog input range • 4 to 20mA (Extended mode)
extended mode
The input ranges supported by the analog
input range extended mode cannot be used for
products of incompatible version.
When the warning of input signal error
detection is enabled, the input signal error
detection can be performed by setting the
same value of upper and lower limit or different
value of upper and lower limit.
The input signal error detection cannot be
Input signal error performed by setting the different value of
detection extended upper and lower limit, but can be performed by
setting setting the same value of upper and lower
limit.
Set the buffer memories as follows.
Buffer memory address 47: Un\G47.b15 to b10
• • • Fixed at 0
Buffer memory addresses 142, 143: Un\G142,
Un\G143 • • • Reserved (system area)
APP -16
(2) Q62AD-DGH
Table Appendix 3 Q62AD-DGH
Description
Applicable version
First 5 digits of GX Configurator-
product number AD
10102 or later 2.09K or later
10102 or later 2.09K or later
MELSEC-Q
Reference
section
Section 3.1.1
Section 4.5
Section 3.2.3
Section 3.4.12
Section3.4.20
APP -16