7
ONLINE MODULE CHANGE
7 - 18
(d)
Monitor the digital output values (buffer memory addresses 11 to 14, 54 to
62, Un\G11 to Un\G14, Un\G54 to Un\G62) to check whether proper
conversion has been made or not.
(5) Resumption of control
(a)
After choosing [Diagnosis] - [Online module change] on GX Developer to
redisplay the "Online module change" screen, click the [Execution] button to
resume control. Module READY (X0) turns on.
(b)
The "Online module change completed" screen appears.
MELSEC-Q
7 - 18