Mitsubishi MELSEC Q Series User Manual page 23

2 SYSTEM CONFIGURATION
Single CPU system
Q00J/Q00/Q01CPU
Multiple CPU system
Single CPU system
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple CPU system
Single CPU system
Q02PH/Q06PHCPU
Multiple CPU system
Single CPU system
Q12PH/Q25PHCPU
Multiple CPU system
Q12PRH/ Redundant CPU
Q25PRHCPU system
Single CPU system
Q00UJ/Q00U/Q01U
CPU
Multiple CPU system
Q02U/Q03UD/
Single CPU system
Q04UDH/
Multiple CPU system
Q06UDHCPU
Q10UDH/Q20UDHC Single CPU system
PU
Multiple CPU system
Single CPU system
Q13UDH/Q26UDH
CPU
Multiple CPU system
Q03UDE/Q04UDEH/
Single CPU system
Q06UDEH/
Q13UDEH/
Multiple CPU system
Q26UDEHCPU
Single CPU system
Q10UDEH/Q20UDE
HCPU
Multiple CPU system
Single CPU system
CPU modules other
than the above
Multiple CPU system
If installed in a MELSECNET/H remote I/O
station
2 - 3
(5) Q62AD-DGH compatible software packages
Relation between the system containing the Q62AD-DGH and software package
is shown in the following table.
GX Developer or GX Works2 is necessary when using the Q62AD-DGH.
GX Developer
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 8.68W or later
Version 7.10L or later
Version 8.45X or later
Version 8.76E or later
Version 8.48A or later
Version 8.76E or later
Version 8.62Q or later
Version 8.68W or later
Version 8.76E or later
Not supported
Version 6 or later
Software Version
GX Configurator-AD
Version 1.14Q or later
Version 1.15R or later
Version 2.09K or later
Not supported
Version 1.14Q or later
MELSEC-Q
GX Works2
Refer to GX Works2
Version1 Operating
Manual (Common).
2 - 3