First Time Setup With Flow Trigger Flush - Culligan G1 Series Installation, Operation And Service Instructions

Quick Programming Chart—First Time Setup with Flow Trigger Flush
Press to select a setting. Press
Select Language
LANGUAGE
ENGLISH
Select the controller language.
FIRST TIME SETUP
From the FTS screen, press
PRESS DOWN ARROW
settings.
Set Up Date
JAN
SET
MONTH
Set the Month, Day, and Year.
1
SET
DAY
SET YEAR
2012
Set Up Clock Type and Time
CLOCK TYPE
Select either a 12-hour clock
12 HR
(12:00A–11:59P) or 24-hour
clock (00:00–23:59)
SET HOUR
NOTE
12PM
1
SET
MINUTES
Set Up System Status at Startup
POWERON MODE
Select the system status at
OFFLINE
startup—offline or running. You
can change status after setup.
Set Up Units of Measure/Initialize System
SYSTEM UNITS
US INCH
Select METRIC for units out-
side the United States.
Culligan® Series G1 Reverse Osmosis
128
or to change the setting. Press
to scroll to the date/time
24-hour clock
format does not
require AM or PM
to save. Press
RUNNING
The "home" screen displays
JAN-01-12 12:01P
the RUNNING or OFFLINE
status of the RO system.
Set Up Flush Modes
1)GOTO RUNNING
2)GOTO OFFLINE Press
3)INFORMATION
and press
>4)SETUP
1)TIME/DATE
2)LANGUAGE
Select 4)FLUSH MODES.
3)POWERON MODE
>4)FLUSH MODES
1)START UP
2)STANDBY
Select 4)FLOW TRIGGER.
3)TIME TRIGGER
>4)FLOW TRIGGER
FLOW TRIG MODE
ON
Change the setting to ON.
FLUSH DURATION
20
Select the flush duration.
MINUTES
FLUSH EVERY
Select the TDS level that will
1000
trigger a quality flush.
GALLONS
Press to save the settings and return to the
home screen.
to exit from a menu.
to scroll to 4)SETUP
for setup menu.
Cat. No. 01021713
128