First Time Set-Up Process - Culligan Gold Arsenic Series Owner's Manual

First Time
Set-up Process
01021568
5
First Time Setup Procedure
When a new controller is first powered on, the screen will display the first time setup message. The Con-
troller is designed to simplify the setup and installation process by making some default recommendations
during the initial setup. These default settings are appropriate for most common installations.
After completing the plumbing connections to the water softener, turn on and program the Controller.
FIRST TIME SETUP
PRESS DOWN ARROW
Serial Number and Firmware Version
S/N: 00000123
FWR***LT01
MON DD YEAR
Set Month (Jan–Dec)
SET
>JAN
MONTH
Set Day (0–31)
SET
>1
DAY
Set Year (2009–2030)
SET YEAR
>2013
Set Clock Type (12 or 24)
CLOCK TYPE
>12 HR
When a new controller is first turned on, the screen displays FIRST TIME
SETUP. Press to display the first setup screen.
The screen displays the serial number, the firmware version and born-on-
date for this Smart Controller. Press
NOTE If this unit will be installed with a modem, it is
required that this electronic ID number be reported
to Culligan on the IQR form.
The screen displays the month setting. Press
displayed (and view the next setting), or press
Press to accept the selected month and advance to the next setting,
SET DAY.
The screen displays the day setting. Press
displayed (and view the next setup screen), or press
setting.
Press to see the next available value. Press
day and advance to the next setting, SET YEAR.
The screen displays the year setting. Press
displayed (and view the next setup screen), or press
setting.
Press to see the next available value. Press
year and advance to the next setting, CLOCK TYPE.
The screen displays the clock type setting. Press
tion displayed (and view the next setup screen), or press
the setting.
Press to change the clock type from 12-hour to 24-hour. Press
to accept the selected clock type and advance to the next setting, SET
HOUR.
to display the month setup screen.
to accept the information
to change the setting.
to accept the information
to change the
to accept the selected
to accept the information
to change the
to accept the selected
to accept the informa-
to change