Modem Setup From Remote Display; Gbe Ro Controller Modem Settings (On Remote) - Culligan G1 Series Installation, Operation And Service Instructions

MODEM TEST
Emailing now
Please Wait ...
Possible Modem Test Results
MODEM TEST ERROR
NO TONE!!

Modem Setup From Remote Display

This setup is completed using the wireless remote device.
RUNNING
JAN-01-12 12:01P
1) INFORMATION
>2) SETUP
3) DIAGNOSTICS
1)RF SETUP
>2)MODEM SETUP

GBE RO Controller Modem Settings (on Remote)

Screen Display
TELEPHONE MODEM
NOT INSTALLED
CALL FREQUENCY
DAILY
DATA PHONE #
18884137028
1)RF SETUP
>2)MODEM SETUP
Cat. No. 01021713
6. Press to begin testing the modem telephone line. The screen displays the sta-
tus of the test before displaying the results. Do not press any buttons before the
test is complete or the controller will return to the Diagnostics menu.
MODEM TEST
NOT POSSIBLE NOW
TRY LATER!
1. From the default home screen, press
2. Press to select 2)SETUP.
3. From the Setup menu, press
plays the modem settings. Use these to set up the communication between the
wireless remote and the Culligan servers.
Range
The screen displays the installation status of the modem. Press
Installed
Not Installed
stalled inside the RO remote display.
Daily
On Error
Press
Daily&Error
controller sending data via modem.
Monthly & Error
The screen displays the data phone number, up to fifteen digits.
0–9,#
Press
each digit
number. When the final digit is entered press
tire phone number.
The screen displays the setup menu. Press
1–2
tings and display the home screen.
MODEM EMAIL
SUCCESS
. The screen displays the main menu.
to select 2)MODEM SETUP. The screen dis-
Changing the Setting
to change the state to installed if a telephone modem is in-
or and then to specify the frequency of the RO
or and then to change each digit of the phone
MODEM TEST
TIME
SET SUCCESS
to accept the en-
to save the set-
Accessories 49