G1 Ro System Configurations - Culligan G1 Series Installation, Operation And Service Instructions

G1 RO System Configurations

A G1-4L is pictured in Figure 1 and Figure 2. Width of membrane rack varies with model. See parts section on page 80
for a list of component part numbers.
MOUNTING BRACKETS
MEMBRANE FEED PRESSURE
MEMBRANES
GBE RO CONTROLLER
RECIRCULATION CONTROL
INLET FEED PRESSURE
WASTE CONTROL
Figure 1. G1 RO front view.
TDS SENSOR
PRODUCT FLOW METER
MOTOR
PRODUCT WATER OUTLET
PRESSURE SWITCH
PUMP
FEED FLOW METER
FAST FLUSH SOLENOID
FEED WATER INLET
INLET SOLENOID
PREFILTER
WASTE WATER OUTLET
Figure 2. G1 RO back view.
Cat. No. 01021713
G1 RO System Configurations 5