Diagnostics; Test Wireless Remote; Test Phone Line - Culligan G1 Series Installation, Operation And Service Instructions

Diagnostics

RUNNING
JAN-01-12 12:01P
1) GO TO RUNNING
2) GO TO OFFLINE
3) INFORMATION
>4) SETUP
3) POWERON MODE
4) FLUSH MODES
5) ACCESSORIES
>6) DIAGNOSTICS
>1) TST WIRELESS
2) TESTPHONELIN
3) USE DATA PORT
4) TEST APP

Test Wireless Remote

>1) TST WIRELESS
2) TESTPHONELIN
3) USE DATA PORT
4) TEST APP
WIRELESS TEST
0 / 188
RSSI=5

Test Phone Line

1) TST WIRELESS
>2) TESTPHONELIN
3) USE DATA PORT
4) TEST APP
MODEM TEST
Emailing now
Please Wait ...
Culligan® Series G1 Reverse Osmosis
64
1. From the default home screen, press
2. Press to scroll to 4) SETUP.
3. Press to select the SETUP menu.
4. Press
diagnostics menu.
5. The screen displays the diagnostics menu.
6. Press to select 1)TST WIRELESS. The screen displays the wireless test
screen.
7. The screen displays the test number and total number of attempts and the re-
ceived signal strength indicator (RSSI). The system will continue to test the signal
strength until you press any button to return to the diagnostics menu.
The signal strength indicator (RSSI) will show a value of between 0 and 8. If the
RSSI is at least 4, then the installation is complete. It the SSI drops below 4, then
it may be necessary to select an alternate location for the wireless remote.
8. Press to select 2)TESTPHONELIN. The screen displays the modem test
screen.
9. Press to begin testing the modem telephone line. The screen displays the
status of the test before displaying the results. Do not press any buttons before the
test is complete or the controller will return to the Diagnostics menu.
. The screen displays the main menu.
to select 6)DIAGNOSTICS. The screen displays the
Cat. No. 01021713
64