Flush Mode Settings - Culligan G1 Series Installation, Operation And Service Instructions

Flush Mode Settings

Screen Display
>1) STARTUP
2) STANDBY
3) TIME TRIGGER
4) FLOW TRIGGER
START UP MODE
OFF
FLUSH DURATION
3
MINUTES
STANDBY MODE
OFF
FLUSH DURATION
3
MINUTES
FLUSH EVERY
3
HOURS
TIME TRIG MODE
OFF
FLUSH DURATION
3
MINUTES
FLUSH EVERY
4
HOURS
Cat. No. 01021713
Range
Startup
Standby
5. The screen displays the Flush Modes menu. Press
Time Trigger
to scroll through the menu and then
Flow Trigger
setting.
Qual Flush
Perm Flush
6. The screen displays the Start Up Mode setting. This will flush
Off
the drain prior to starting the pump. Press
On then
sure flush.
7. If startup mode is set to ON, the screen displays the flush
1–180
duration of the drain. Press
change the value and then return to the Flush Mode menu.
8. The screen displays the Standby Mode setting. This will flush
Off
the drain when the unit is in standby mode. Standby mode
may be triggered manually, by a STORAGE TANK FULL er-
On
ror, by a pretreatment lockout command, or other states. This
is a low pressure flush. Press
change the value if necessary.
9. If standby mode is set to ON, the screen displays the flush du-
1–180
ration setting. Press
value and then display the next setting.
10. If standby mode is set to ON, the screen displays the flush in-
1–24
terval setting. Press
value and then return to the Flush Mode menu.
11. The screen displays the Time Trigger Mode setting. A flush
Off
will be triggered after a specified amount of time has passed.
Press
On
necessary.
12. If time trigger mode is set to ON, the screen displays the flush
1–180
duration setting. Press
the value and then display the next setting.
13. If time trigger mode is set to ON, the screen displays the flush
1–24
interval setting. Press
the value and then return to the Flush Mode menu.
Procedure
to change the value if necessary. This is a line pres-
or
or and then
or and then to change the value if
or
or
or
to select a flush mode
or and
or and then to
or and then to
and then to change the
to change the
and then to change
and then to change
Setup 37