Basic Sub-Panel Wiring Diagram, 230V - Culligan G1 Series Installation, Operation And Service Instructions

GROC Basic Sub-Panel Wiring Diagram, 230V
NOTE For Series G1 RO Systems, make sure the voltage selector switch (see * below) is set at 230 VAC.
NOTE *Agency certified and marked by VDE, HAR, or equivalent agency 6A, 250 VAC, 65C, PVC, VW-1, or
FV-1 Flame Rating. Type H05VV-F/H07RN-F or equivalent, 3x1.5 mm wire size, 10.5x12.5 cable OD. The
supply cord shall have a green/yellow core that is connected to the grounding terminal of the appli-
ance and to the grounding contact of the plug.
Cat. No. 01021713
Figure 57. GBE RO Controller Basic sub-panel wiring.
G1 RO International 105