GBE-Wireless Communication Setup
Now set up the RO controller to communicate with the wireless remote.
RUNNING
JAN-01-12
12:01P
1) GO TO RUNNING
2) GO TO OFFLINE
3) INFORMATION
>4) SETUP
2) LANGUAGE
3) POWERON MODE
4) FLUSH MODES
>5) ACCESSORIES
>1) WIRELESS REM
2) MODEM
3) FLOW METERS
4) SWITCH INPTS
REMOTE DISPLAY
NOT INSTALLED
CHANNEL #
>1
RF FREQUENCY
915 Mhz
RUNNING
JAN-01-12
12:01P
Cat. No. 01021713
1.
From the default home screen, press
2.
Press
to scroll to 4) SETUP.
3.
Press
to select the SETUP menu.
4.
Press
cessories menu.
5.
Press
cessories menu.
6.
Press
or
and then
7.
Press
or
and then
The CHANNEL # for the RO controller must be the same as the CHANNEL # for
the Remote Display.
8.
Use this setting to select the correct radio frequency. Do not change the RF fre-
quency for North America installations..
9.
Press
to save the settings and return to the home screen.
. The screen displays the main menu.
to select 5)ACCESSORIES. The screen displays the ac-
to select 5)ACCESSORIES. The screen displays the ac-
to change the state to INSTALLED.
to select the channel number of the control valve.
Accessories
43