Configure Eda 2530 Tag Protocol Id/Bridging Parameters - Ericsson EDA 2530 Commissioning Instructions

7.3

Configure EDA 2530 Tag Protocol ID/Bridging Parameters

Prior to configuring any services the EDA 2530 TPID should be configured, as
follows:-
a.
b.
c.
d.
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
From the top line menu select the path Configuration > IP/Ethernet
Management > Bridging Parameters.
From the" Equipment Level Bridging Parameters Configuration" window,
change the "Bridge Ethertype S (hex-str)" field from 88A8 to 8100.
Select the "Apply" button then the "Refresh" option.
Note: When TPID=8100 all VLAN tags (S+C) contained within received
traffic are 'read' and used to switch traffic. When TPID=88A8 only the outer
VLAN (S) tag is 'read' and used to switch traffic.
Select "Cancel" to return back to the main LCT screen.
EDA 2530 Commissioning Procedure for Cable and Wireless Access
© Ericsson AB 2010
Commercial in confidence
74 (200)