7.2
Configure CP Ethernet Interfaces
7.2.1
Configure CP Port 1
Configure CP Port 1 GigE interface to be the In Band Management interface.
a.
b.
c.
d.
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
Right click on the CP Card and select Ethernet Lines from the sub menu.
Select the "Port 1" button, then click on "Configure", the following window
will be displayed:-
From the "Configuration" folder tick the Local In-Band Mng tick box. Then
click on the "Apply" button that is immediately to the left of the tick box.
Select the "MAU" folder, the following window will be displayed:-
EDA 2530 Commissioning Procedure for Cable and Wireless Access
© Ericsson AB 2010
Commercial in confidence
72 (200)