Eda 2530 Msan Equipment; General Equipment Description; Equipment Overview - Ericsson EDA 2530 Commissioning Instructions

2

EDA 2530 MSAN Equipment

This section provides an overview of the EDA Access Hub equipment. Read this
section if you are not familiar with the EDA 2530.
2.1

General Equipment Description

Within the Access Network, the EDA 2530 fulfils the function of connecting
subscribers through xDSL technology, to provide them with both PSTN telephony
and IP data access.
The data traffic is then forwarded towards the IP Network through IP links. It is
located between the switch/network-side units and the subscriber units.
2.2

Equipment Overview

The EDA 2530 system can be used in four different deployment scenarios:
•
Cascade
Star
Ring
Standalone Option
Most of the equipment will be commissioned in the "Standalone" scenario, this
procedure only deals with this type of scenario. In this architecture, the equipment
collects user traffic and sends it to the core network via an Ethernet-based uplink.
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
Standalone
Figure 2.1 – EDA 2530 Subrack Standalone Option
EDA 2530 Commissioning Procedure for Cable and Wireless Access
© Ericsson AB 2010
Commercial in confidence
11 (200)