Pc Connection Cables For Commissioning - Ericsson EDA 2530 Commissioning Instructions

No. Description
1 A PC to run EDA2530 LCT application (Min specifications
Pentium III 750MHz, 542Mb Ram, 200Mbyte free space,
CD-ROM, resolution 1024x768). Operating System XP or
Vista.
2 EDA 2530 Local Controller Software CD for the release of
the EDA 2530 being commissioned. (S38-xxxx/xx.xx.xx)
3 RJ45 Crossover cable for connecting the Local Controller
Ethernet Port to the EDA 2530. Refer to Section 3.3.1.
4 RS232 Serial Cable Set, used to connect the Common
Part Unit (CP) RS232 interface to the PC serial COM
port. (Refer to Section 3.4.1 for details)
5 Digital Multimeter
6 "Golden Modem" multi-level xDSL service tester, with
ADSL /G.SHDSL module interfaces. Capable of ATU-R
and STU-R modem operation modes or an ADSL
modem, Eg. Linksys AM200 ADSL2+ modem.
7 SHDSL Modem Eg. Billion BiPAC 8520 up to 4.6Mbps
(4-wire SHDSL) Bridge/Router
8 Optical Power Meter with adapter lead for LC connection.
9 HDF block 2 pole to RJ11 test cord (Banana plugs)
10 HDF block 2 pole to RJ11 test cord
11 HDF Krone block 2 pole to RJ11 test cord
12 Butt Telephone Test Set with either internal or external
DSL/POTS filtering. Eg. Fluke TS-25D Telephone Test
kit. (Which includes DSL/POTS filtering)
13 RJ11 ADSL filter for Test Telephone
3.3.1

PC Connection Cables for Commissioning

Cable for connecting the Local Controller Ethernet Port to the EDA 2530 Common
Part Card. .
RJ45 Crossover Cable - Local Controller Ethernet Port to EDA 2530
RJ45 Connector
Signal
TD+
TD-
RD+
RD-
TD = Transmit Data
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
EDA 2530 Commissioning Procedure for Cable and Wireless Access
Common Part Card
Pin Pin
1
2
3
6
Code
(Q4273)
CWA0002
CWA006
CWA007
CWA008
RJ45 Connector
Signal
3 RD+
6 RD-
1 TD+
2 TD-
RD = Receive Data
© Ericsson AB 2010
Commercial in confidence
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
34 (200)