Debug Cluster - Cisco Catalyst 3550 Command Reference Manual

Appendix B Debug Commands

debug cluster

Use the debug cluster privileged EXEC command to debug cluster-specific events. Use the no form of
this command to disable debugging output.
Syntax Description
discovery
events
extended
hsrp
http
ip [packet]
members
nat
neighbors
snmp
vqpxy
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
The undebug cluster command is the same as the no debug cluster command.
78-11195-09
debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat | neighbors
| snmp | vqpxy}
no debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat |
neighbors | snmp | vqpxy}
Display cluster discovery debugging messages.
Display cluster event debugging messages.
Display extended discovery debugging messages.
Display the Hot Standby Router Protocol (HSRP) debugging messages.
Display Hypertext Transfer Protocol (HTTP) debugging messages.
Display IP or transport packet debugging messages.
Display cluster member debugging messages.
Display Network Address Translation (NAT) debugging messages.
Display cluster neighbor debugging messages.
Display Simple Network Management Protocol (SNMP) debugging messages.
Display VLAN Query Protocol (VQP) proxy debugging messages.
Modification
This command was first introduced.
Catalyst 3550 Multilayer Switch Command Reference
debug cluster
B-5