Show Tcam Qos - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

show tcam qos

Use the show tcam qos user EXEC command to display about the quality of service (QoS) region of the
specified ternary content addressable memory (TCAM). Use the keywords to display information for a
specific TCAM ID or specific characteristics.
Syntax Description tcam-id
entries [entry-id]
port-labels [label-id]
vlan-labels [label-id]
masks [mask-id]
size
statistics [entries | hits |
labels | masks]
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(4)EA1
12.1(9)EA1
78-11195-09
show tcam qos tcam-id {{entries [entry-id]} | {port-labels [label-id]} | {vlan-labels [label-id]} |
{masks [mask-id]} | size | {statistics [entries | hits | labels | masks]}} [ | {begin | exclude |
include} expression]
Identify the TCAM ID for displaying QoS TCAM information. (Optional)
Display information for a specific TCAM ID. The ID range varies from 1 to
3, depending on the switch model.
Display one or all TCAM QoS entries and associated information. When all
entries appear, the mask information also appears. This display output is a
raw hex dump of information intended for a Cisco technical support
representative. The entry ID range is 0 to 65535.
Display entries and associated information for a QoS port label. This
display output is a raw hex dump of information intended for a Cisco
technical support representative. The label ID range is 0 to 255.
Display entries and associated information for a QoS VLAN label. This
display output is a raw hex dump of information intended for a Cisco
technical support representative. The label ID range is 0 to 255.
Display mask information. This display output is a raw hex dump of
information intended for a Cisco technical support representative. The mask
ID range is 0 to 65535.
Display the size of the QoS TCAM region.
Display allocation statistics for the QoS TCAM region, including allocated
and available masks and entries.
(Optional) Display allocation statistics for entries, hits, labels, or masks.
The labels keyword returns a total count of all labels present in TCAM.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The labels [label-id] keywords were replaced by port-labels [label-id] and
vlan-labels [label-id].
Catalyst 3550 Multilayer Switch Command Reference
show tcam qos
2-373