Cisco Catalyst 3550 Command Reference Manual page 371

Chapter 2 Cisco IOS Commands
This is an example of output from the show parser macro name command:
Switch#show parser macro name standard-switch10
Macro name : standard-switch10
Macro type : customizable
macro description standard-switch10
# Trust QoS settings on VOIP packets
auto qos voip trust
# Allow port channels to be automatically formed
channel-protocol pagp
This is an example of output from the show parser brief command:
Switch#show parser macro brief
This is an example of output from the show parser description command:
Switch#show parser macro description
Interface
--------------------------------------------------------------
Fa0/9
Fa0/10
--------------------------------------------------------------
This is an example of output from the show parser description interface command:
Switch#show parser macro description interface fa0/10
Interface
--------------------------------------------------------------
Fa0/10
--------------------------------------------------------------
Related Commands Command
macro apply
macro description
macro name
78-11195-09
standard-switch10
testm
Macro Description
standard-switch10
this is test macro
Macro Description
this is test macro
Description
Apply a macro on an interface, or apply and trace a macro on an interface.
Add a description about the macros that are applied to an interface.
Create a macro.
Catalyst 3550 Multilayer Switch Command Reference
show parser macro
2-345