Debug Cpu-Interface - Cisco Catalyst 3550 Command Reference Manual

Appendix B Debug Commands

debug cpu-interface

Use the debug cpu-interface privileged EXEC command to debug the driver for the application-specific
integrated circuit (ASIC) that interfaces the CPU to the switch ASIC. Use the no form of this command
to disable debugging output.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
The undebug cpu-interface command is the same as the no debug cpu-interface command.
Related Commands Command
show debugging
78-11195-09
debug cpu-interface
no debug cpu-interface
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Catalyst 3550 Multilayer Switch Command Reference
debug cpu-interface
B-7