Debug Acltcam; Appendix B Debug Command - Cisco Catalyst 3550 Command Reference Manual

debug acltcam

debug acltcam
Use the debug acltcam privileged EXEC command to debug the actions of the quality of service/access
control list (QoS/ACL) ternary content addressable memory (TCAM) manager software module, which
controls the allocation and updating of entries in the parts of the TCAM used for input security ACLs,
output security ACLs, and QoS ACLs. Use the no form of this command to disable debugging output.
Syntax Description
verbose
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
The undebug acltcam command is the same as the no debug acltcam command.
Related Commands Command
show debugging
Catalyst 3550 Multilayer Switch Command Reference
B-2
debug acltcam [verbose]
no debug acltcam [verbose]
(Optional) Enable more detailed debugging.
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Appendix B Debug Commands
78-11195-09