Clear Setup Express - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

clear setup express

Use the clear setup express privileged EXEC command to exit Express Setup mode without saving the
current configuration.
Syntax Description
This command has no arguments or keywords.
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.1(14)EA1
Usage Guidelines You can use the clear setup express privileged EXEC command to exit Express Setup mode. For
example, if you activate Express Setup and then decide to connect to the switch through the console port
instead of through an Ethernet port, enter the clear setup express command. The switch exits Express
Setup mode. The IP address 10.0.0.1 is no longer valid on the switch, and your connection using this IP
address is ended.
This command is available only when the switch is in Express Setup mode.
Examples This example shows how to exit Express Setup mode:
Switch# clear setup express
You can verify that the switch has exited Express Setup mode by entering the show express setup
privileged EXEC command.
Related Commands Command
setup express
show setup express
78-11195-09
clear setup express
Modification
This command was introduced.
Description
Enables Express Setup mode on the switch.
Displays if Express Setup mode is active on the switch.
Catalyst 3550 Multilayer Switch Command Reference
clear setup express
2-43