Cisco Catalyst 3550 Command Reference Manual page 290

show etherchannel
Ports in the Port-channel:
Index
------+------+------+------------
0
0
Time since last port bundled:
This is an example of output from the show etherchannel 1 protocol command:
3550-48-132#show etherchannel 1 protocol
Protocol:
This is an example of output from the show etherchannel 1 summary command:
Switch> show etherchannel 1 summary
Flags:
Group Port-channel
-----+------------+-----------------------------------------------------------
1
This is an example of output from the show etherchannel 1 port-channel command:
Switch> show etherchannel 1 port-channel
Port-channels in the group:
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
GC
Port state
Ports in the Port-channel:
Index
------+------+------+------------
0
0
Time since last port bundled:
Related Commands Command
channel-group
interface port-channel
Catalyst 3550 Multilayer Switch Command Reference
2-264
Load Port EC state
00 Gi0/1 desirable-sl
00 Gi0/2 desirable-sl
LACP
D - down P - in port-channel
I - stand-alone s - suspended
R - Layer3 S - Layer2
U - port-channel in use
Ports
Po1(SU) Gi0/1(P)
----------------------
= 00d:00h:10m:41s
= 1/0
= 0x00010001
= Port-channel Ag-Inuse
Load Port EC state
00 Gi0/1 desirable-sl
00 Gi0/2 desirable-sl
Description
Assigns an Ethernet interface to an EtherChannel group.
Accesses or creates the port channel.
00d:00h:07m:56s
Gi0/2(P)
Number of ports = 2
HotStandBy port = null
00d:00h:10m:08s
Chapter 2 Cisco IOS Commands
Gi0/1
Gi0/1
78-11195-09