Clear Pagp - Cisco Catalyst 3550 Command Reference Manual

clear pagp

clear pagp
Use the clear pagp privileged EXEC command to clear Port Aggregation Protocol (PAgP)
channel-group information.
Syntax Description
channel-group-number
counters
Defaults This command has no default setting.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Examples
This example shows how to clear channel-group information for a specific group:
Switch# clear pagp 10
This example shows how to clear channel-group traffic filters:
Switch# clear pagp counters
You can verify that information was deleted by entering the show pagp privileged EXEC command.
Related Commands Command
show pagp
Catalyst 3550 Multilayer Switch Command Reference
2-40
clear pagp {channel-group-number [counters] | counters}
Channel group number. The range is 1 to 64.
Clear traffic filters.
Modification
This command was first introduced.
Description
Displays PAgP channel-group information.
Chapter 2 Cisco IOS Commands
78-11195-09