Cisco Catalyst 3550 Command Reference Manual page 254

show access-lists
This is an example of output from the show access-lists hardware counters command:
Switch# show access-lists hardware counters
Input Drops:
Output Drops:
Input Forwarded:
Output Forwarded:
Input Bridge Only:
Bridge and Route in CPU: 0 matches (0 bytes)
Route in CPU:
Related Commands Command
access-list
ip access list
mac access-list extended
Catalyst 3550 Multilayer Switch Command Reference
2-228
0 matches (0 bytes)
0 matches (0 bytes)
234781 matches (19942889 bytes)
0 matches (0 bytes)
0 matches (0 bytes)
160 matches (10344 bytes)
Description
Configures a standard or extended numbered access list on the switch.
For syntax information, select Cisco IOS IP and IP Routing
Command Reference for IOS Release 12.1 > IP Addressing and
Services > IP Services Commands.
Configures a named IP access list on the switch. For syntax
information, select Cisco IOS IP and IP Routing Command
Reference for IOS Release 12.1 > IP Addressing and Services > IP
Services Commands.
Configures a named or numbered MAC access list on the switch.
Chapter 2 Cisco IOS Commands
78-11195-09