Cisco Catalyst 3550 Command Reference Manual page 408

show vlan
Table 2-25 show vlan Command Output Fields (continued)
Field
BrdgNo
Stp
BrdgMode
Trans1
Trans2
AREHops
STEHops
Backup CRF
Remote SPAN VLANs
This is an example of output from the show vlan brief command:
Switch> show vlan brief
VLAN Name
---- -------------------------------- --------- -------------------------------
1
1002 fddi-default
1003 token-ring-default
1004 fddinet-default
1005 trnet-default
This is an example of output from the show vlan id command. The specified VLAN is in the extended
VLAN range.
Switch# show vlan id 2005
VLAN Name
---- -------------------------------- --------- -------------------------------
2005 VLAN2005
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
2005 enet
This is an example of output from the show vlan dot1q tag native command:
Switch> show vlan dot1q tag native
dot1q native vlan tagging is disabled
Catalyst 3550 Multilayer Switch Command Reference
2-382
Description
Bridge number for the VLAN, if applicable.
Spanning Tree Protocol type used on the VLAN.
Bridging mode for this VLAN—possible values are source-route bridging
(SRB) and source-route transparent (SRT); the default is SRB.
Translation bridge 1.
Translation bridge 2.
Maximum number of hops for All-Routes Explorer frames—possible values
are 1 through 13; the default is 7.
Maximum number of hops for Spanning-Tree Explorer frames—possible
values are 1 through 13; the default is 7.
Status of whether or not the Token Ring concentrator relay function (TrCRF)
is a backup path for traffic.
Identify any RSPAN VLANs that have been configured.
default
SAID MTU
102005 1500
Status Ports
active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
active
active
active
active
Status Ports
active Fa0/2
Parent RingNo BridgeNo Stp
- - -
Chapter 2 Cisco IOS Commands
BrdgMode Trans1 Trans2
- - 0 0
78-11195-09