Resetting The Maintenance Counter; Lubrication Specification - Lexmark MB2338 Service Manual

Part number and kit
41X1229—Maintenance Kit (220 V)
When performing the 200K scheduled maintenance procedure, the following areas should be cleaned of media
dust and toner contamination:
•
Media trays
•
Imaging unit area
•
Transfer roller area
•
Duplex area
•
Standard bin

Resetting the maintenance counter

Always reset the maintenance counter after installing the maintenance kit.
To reset the maintenance counter:
1
POR into the Configuration menu, and navigate to Reset Maintenance Counter.
2
Depending on the printer model, press OK or touch
resetting the counter.
Once initiated, the operation cannot be canceled.
Lubrication specification
Lubricate only when the parts are replaced or if necessary, not on a scheduled basis. The use of lubricants
other than those specified in this service manual may cause premature failure. Some unauthorized lubricants
may chemically attack polycarbonate parts. Use Grease P/N 99A0394 Nyogel 744.
Contents
•
41X1179—Fuser (220 V)
•
41X1197—MPF pick roller and separator pad
•
41X0918—Pick tires
•
40X8393—Transfer roller
to reset the counter, or press X to exit without
Maintenance
316
7017-2xx, -4xx, -6xx