Lexmark MB2338 Service Manual page 91

Optional tray to sensor (input) jam at trailing edge service check
Action
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
Does the problem remain?
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Input tray quick print > MPF tray > Single
b
Check if the same error occurs.
Does the same problem remain?
Step 3
Check the optional tray separator roller assembly for wear and
damage.
Is the separator roller assembly free of wear and damage?
Step 4
Replace the separator roller assembly. See
assembly removal" on page
Does the problem remain?
Step 5
Check the transfer roller and its spring for improper installation and
damage.
Is the transfer roller properly installed and free of damage?
Step 6
Reinstall or replace the transfer roller. See
removal" on page 250.
Does the problem remain?
Step 7
Check if the fuser cam is functional and free of damage.
Is the fuser cam functional and free of damage?
Step 8
Replace the fuser cam. See
page 215.
Does the problem remain?
"Avoiding jams" on page
"Separator roller
300.
"Transfer roller
"Fuser actuator removal" on
Diagnostics and troubleshooting
Yes
Go to step 2.
71.
Go to step 5.
Go to step 5.
Go to step 5.
Go to step 7.
Go to step 7.
Go to step 9.
Go to step 9.
91
7017-2xx, -4xx, -6xx
No
The problem is
solved.
Go to step 3.
Go to step 4.
The problem is
solved.
Go to step 6.
The problem is
solved.
Go to step 8.
The problem is
solved.