Entering the Service Engineer (SE) menu
To access the Service Engineer (SE) menu:
1
Turn on the printer.
2
When the home screen appears, press * * 411 on the control panel.
For 2‑line control panels, press the right arrow button twice, press OK, and then press the left arrow button.
General SE
This setting allows you to save a log file to a USB drive.
Enter the Service Engineer (SE) menu, and then navigate to:
General SE > Capture Logs to USB Drive
Network SE
Enter the Service Engineer (SE) menu, and then touch Network SE.
Note: Use these settings as directed by the next level of support.
Top level menu
Print SE Menus
History
MAC
NPAP
TCP/IP
Wireless
Ping Test
Other Actions
Intermediate menu
Print SE Menus
•
Print History
•
Mark History
•
Set Card Speed
•
LAA
•
Keep Alive
Print Alerts
•
netstat
•
arp
•
Allow SNMP Set
•
MTU
•
Meditech Mode
•
RAW LPR Mode
Enable Wi‑Fi Direct Sigma Control Agent
•
Ping
•
Ping6
•
ifconfig
•
IPtables [Firewall Dump]
•
IP6tables [Firewall Dump]
•
IPsec Dump
Service menus
184
7017-2xx, -4xx, -6xx