Lexmark MB2338 Service Manual page 141

Action
Step 5
a
Remove the left cover. See
209.
b
Remove the right cover. See
page 223.
c
Reseat the cable from the motor (cartridge) and the controller
board.
Does the problem remain?
Step 6
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Motor tests > K toner
add
b
Touch Start.
Does the motor run?
Step 7
Check the motor (cartridge) and its gears for misalignment, wear,
and damage.
Is the cartridge gearbox properly installed and free of wear and
damage?
Step 8
Reinstall or replace the cartridge gearbox. See
removal" on page 220.
Does the problem remain?
"Left cover removal" on page
"Right cover removal" on
"Cartridge gearbox
Diagnostics and troubleshooting
141
7017-2xx, -4xx, -6xx
Yes No
Go to step 6. The problem is
solved.
Contact the next Go to step 7.
level of support.
Contact the next Go to step 8.
level of support.
Contact the next The problem is
level of support. solved.