Reset Separator Roll And Pick Assembly Counter; Reset Fuser Counter; Reset Maintenance Counter - Lexmark X925 Service Manual

7541-03x
Configuration Menu
Auto Align Adj
Color Alignment
ADF Edge Erase
FB Edge Erase
Scanner Manual Registration
Disable Scanner
Paper Prompts
Envelope Prompts
Action for Prompts
Jobs On Disk
Disk Encryption
Erase all information on Disks
Wipe All Settings
Font Sharpening
Require Standby
UI Automation
Key Repeat Initial Delay
Key Repeat Rate
Clear Custom Status
USB Speed
USB PnP
Automatically Display Error Screens
Exit Config Menu

Reset Separator Roll and Pick Assembly Counter

Use this menu setting to reset the paperfeed assembly counter after changing out the paperfeed rolls, or the
paperfeed unit.

Reset Fuser Counter

This menu item is used to reset the fuser counter for the print engine.
1.
Touch the menu item. A "Reset Fuser Counter" button is displayed.
2.
Touch that button to reset the counter.

Reset Maintenance Counter

This menu item is used to reset the maintenance counter for the print engine.
1.
Touch the menu item. A "Reset Maintenance Counter" button is displayed.
2.
Touch that button to reset the counter.
3-10
Service Manual
See "Auto Align Adj" on page 3-13
See "Color Alignment" on page 3-14
See "ADF Edge Erase" on page
See "FB Edge Erase" on page
See "Scanner Manual Registration" on page
See "Disable Scanner" on page
See "Paper Prompts" on page 3-15
See "Envelope Prompts" on page 3-15
See "Action for Prompts" on page 3-15
See "Jobs On Disk" on page 3-15
See "Disk Encryption" on page 3-16
See "Erase all information on Disks" on page 3-16
See "Wipe All Settings" on page
See "Font Sharpening" on page 3-16
See "Require Standby" on page 3-16
See "Key Repeat Initial Delay" on page 3-16
See "Key Repeat Rate" on page 3-16
See "Clear Custom Status" on page 3-16
See "USB Speed" on page 3-17
See "USB PnP" on page
See "Automatically Display Error Screens" on page
See "Exit Config Menu" on page
3-14.
3-15.
3-15.
3-15.
3-16.
3-17.
3-17.
3-17.