Entering Safe Mode (Everready Mode); Accessing The Network Se Menu; Service Engineer Menu; Accessing The Service Engineer (Se) Menu - Lexmark MS911 Service Manual

Entering Safe Mode (EverReady Mode)

This mode enables the printer to temporarily offer minimal print capabilities.
1
Turn off the printer.
2
Press and hold 7 and 6 while turning on the printer.
3
Release the buttons after 10 seconds.

Accessing the Network SE Menu

This menu contains settings for fine tuning the communication settings for the network interfaces and protocols.
1
Navigate to:
Networks/Ports > Standard Network > Standard Network Setup
2
Press and hold 6, 7, and 9.

Service Engineer menu

Accessing the Service Engineer (SE) Menu

From a Web browser on a host computer, add /se to the printer IP address.

Service Engineer (SE) Menu

Use this menu as directed by the next level of support.
Top level menu
Print SE Menus
General
Code Revision Info
History
MAC
NVRAM
Intermediate menu
‑‑
Copyright
•
Network Code Level
•
Network Compile Info
•
Printer Code Level
•
Printer Compile Info
• Print History
•
Mark History
•
History Mode
• Set Card Speed
• LAA
• Keep Alive
•
Dump NVRAM
•
Reinit NVRAM
Service menus
212
4021, 7421