Factory Settings For The Inverter - Siemens SINAMICS G110D Operating Instructions Manual

5.5

Factory settings for the Inverter

Default command and setpoint sources
Inverters used in automation solutions have the appropriate fieldbus interfaces. These
Inverters are preset in the factory so that the appropriate control and status signals can be
exchanged using the fieldbus interface.
Table 5- 1 Command and setpoint sources
Parameter Description
P0700 = 6 Select the command source
Fieldbus
P1000 = 3 Select the setpoint source
Fixed frequencies
Table 5- 2 Factory setting of additional important parameters
Parameter Factory setting Meaning of the factory setting
P0003 1
P0004 0
P0010 0
P0100 0
P0300 1
P0304 400
P0305 depends on
the
Power Module
P0307 depends on
the
Power Module
P0308 0
P0309 0
P0310 50
P0311 1395
SINAMICS G110D
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
Access to the most frequently used
parameters
All parameters are displayed
Ready to be entered
Europe [50 Hz]
Induction motor
[V]
[A]
[kW/hp]
[cos phi]
[%]
[Hz]
[rpm]
5.5 Factory settings for the Inverter
Function
Selecting the user access level
Parameter filter: filters parameters in ac-
cordance with the functionality
Commissioning parameter
Frequency of the regional supply network
IEC, Europe
•
NEMA, North America
•
Select the motor type (induction motors /
synchronous motor)
Rated motor voltage
(in accordance with rating plate in V)
Rated motor current
(in accordance with rating plate in A)
Rated motor output
(in accordance with the rating plate in
kW/hp)
Rated motor power factor (in accordance
with rating plate in cos 'phi') when P0100 =
1.2, then P0308 is irrelevant
Rated motor efficiency (in accordance with
rating plate in %) when P0100 = 0, then
P0309 is irrelevant
Rated motor frequency
(in accordance with rating plate in Hz)
Rated motor speed
(in accordance with rating plate in rpm)
Commissioning
Access
level
1
1
1
1
2
1
1
1
1
1
1
1
67