6.9.2.4
Parameterizing a motor holding brake
Motor holding brake applications
The motor holding brake prevents the motor turning when the inverter is switched-off. The
inverter has internal logic to control a motor holding brake.
The motor holding brake control inside the inverter is suitable for the following typical
applications:
● Pumps
● Fans
● Horizontal and vertical conveyors
Operating characteristics of the motor holding brake control after an OFF1 and OFF3 command
Image 6-12
SINAMICS G110D
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
Function diagram of the motor holding brake control after an OFF1 or OFF3 command
Functions
6.9 Technological functions
137