Siemens SINAMICS G110D Operating Instructions Manual page 198

Service and maintenance
7.1 Behaviour of the Inverter when replacing components
Replacing different components or version
If you replace different components with different software releases, then the Inverter must
always be re-commissioned.
Questions that can arise in conjunction with replacing components:
● How do I create a valid parameter set?
When commissioning, you can create a valid parameter set either using the
commissioning software STARTER or using the IOP.
● Which options are available for saving a valid parameter set? You can save a valid
parameter set either on the memory card or on the computer that you use for
commissioning with STARTER.
● How do I load a valid parameter set into my frequency inverter?
From the memory card when the frequency inverter is powered-up or by manually
downloading a parameters set either from the memory card or from the PC.
198
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
SINAMICS G110D