Adapting The Inverter To The Application; General Basics - Siemens SINAMICS G110D Operating Instructions Manual

2.2

Adapting the Inverter to the application

2.2.1

General basics

Parameterizable inverters transform standard motors into variable-speed drives
Inverters are parameterized to adapt them to the motor being driven so that this can be
optimally operated and protected. This is realized using one of the following operator units:
● Intelligent Operator Panel (IOP) hand-held kit.
● Software (STARTER commissioning tool) that allows the inverter to be parameterized
and controlled from a PC.
Inverters are used to improve and expand the starting and speed response of motors.
Many standard applications can function with the default parameters
Although inverters can be parameterized for very specific applications, many standard
applications can be configured by means of just a few parameters.
Use the factory settings (where possible)
For basic applications, commissioning can be carried out using just the factory settings.
Use quick commissioning (for simple, standard applications)
In the majority of standard applications, commissioning can be carried out by entering or
changing just a few parameters during quick commissioning.
SINAMICS G110D
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
2.2 Adapting the Inverter to the application
Introduction
19