Siemens SINAMICS G110D Operating Instructions Manual page 73

pasted into another application such as Notepad to allow a permanent record of the
configuration to be stored.
Ensure that "Then start commissioning wizard" is selected and click "Finish".
The "Control Method" dialog is displayed.
Image 5-9
Select the required control method and click "Next". The command and setpoints source
dialog is displayed.
SINAMICS G110D
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
Select control method dialog
Commissioning
5.6 Commissioning with STARTER
73