First steps | Graphically testing the workpiece (option 20)
Selecting the NC program
Press the PGM MGT key
The control opens the file manager.
Press the LAST FILES soft key
The control opens a pop-up window with the
most recently selected files.
Use the arrow keys to select the NC program
that you want to test. Load with the ENT key
Selecting the screen layout and the view
Press the Screen layout key
The control displays all available alternatives in
the soft-key row.
Press the PROGRAM + MACHINE soft key
In the left half of the screen the control shows
the NC program; in the right half it shows the
workpiece blank.
The control provides the following views:
Soft keys
Function
Plan view
Projection in three planes
3-D view
Further information on this topic
Graphic functions
Further information:
Performing a test run
Further information:
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
"Graphics (option 20)", Page 234
"Test run", Page 249
2
45