The Smart.nc Pilot - HEIDENHAIN ITNC 530 - PILOT SMART NC Manual

The smarT.NC Pilot

... is the concise programming guide for the smarT.NC
operating mode of the iTNC 530. For complete information on
programming and operating the iTNC 530, refer to the User's
Manual.
Symbols in the Pilot
Certain symbols are used in the Pilot to denote specific types of
information:
Important note!
The TNC and the machine tool must be prepared by
the machine tool builder to perform this function!
Warning: danger for the user or machine!
Control
iTNC 530
iTNC530 with HSCI
iTNC 530, export version
iTNC 530, export version with
HSCI
iTNC 530 with Windows XP
iTNC 530 with Windows XP,
export version
iTNC 530 programming station
NC software number
340 490-06
606 420-01
340 491-06
606 421-01
340 492-06
340 493-06
340 494-06
3