Possibilities For Intervention On The Control - HEIDENHAIN TNC 620 User Manual

Testing and running | Running CAM programs

Possibilities for intervention on the control

Cycle 32 TOLERANCE is available for influencing the behavior of
CAM programs directly on the control. Please note the information
describing the functioning of Cycle 32. Also note the interactions
with the chord error defined in the CAM system.
Further information: Cycle Programming User's Manual
Refer to your machine manual.
Some machine tool builders provide an additional
cycle for adapting the behavior of the machine to the
respective machining operation, such as Cycle 332
Tuning. Cycle 332 can be used to modify filter settings,
acceleration settings, and jerk settings.
Example
34 CYCL DEF 32.0 TOLERANCE
35 CYCL DEF 32.1 T0.05
36 CYCL DEF 32.2 HSC MODE:1 TA3
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
6
281