Positioning With Manual Data Input (Mdi) - HEIDENHAIN TNC 620 User Manual
Setup, testing and running nc programs
Hide thumbs
Also See for TNC 620:
- User manual (616 pages) ,
- Operating instructions manual (64 pages) ,
- User manual (571 pages)
Table of Contents
Advertisement
6
Positioning with manual data input (MDI)
Select Positioning w/ Manual Data Input
operating mode
Program the desired available function
Press the NC Start key
The control executes the highlighted NC block.
Further information:
Data Input operating mode", Page 285
Operating and programming notes:
The following functions are not available in the
Positioning w/ Manual Data Input operating mode:
FK free contour programming
Program call
Programming graphics
Program-run graphics
Using the SELECT BLOCK and CUT OUT BLOCK soft
keys etc. you can also conveniently and rapidly reuse
program sections from other NC programs.
Further information:
Conversational Programming or ISO Programming
You can control and modify Q parameters with the
soft keys Q PARAMETER LIST and Q INFO.
Further information:
parameters", Page 258
286
Testing and running | Positioning w/ Manual Data Input operating mode
"Positioning w/ Manual
PGM CALL
SEL PGM
CALL SELECTED PGM
User's Manual for
"Checking and changing Q
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Advertisement
Table of Contents
