HEIDENHAIN TNC 620 User Manual page 93

Fundamentals | File management
Displaying video files
This function must be enabled and adapted by the
machine tool builder.
Proceed as follows to open video files with the extension ogg,
oga, ogv or ogx directly on the control:
Call the file manager: Press the PGM MGT key
Select the directory in which the video file is
saved
Move the cursor to the video file
Press the ENT key
The control opens the video file in its own
application.
The paid-for Fluendo Codec Pack is required for other
formats, such as for MP4 files.
Any additional software is installed by your machine tool
builder.
Displaying graphics files
Proceed as follows to open graphics files with the extension
or directly on the control:
bmp, gif, jpg png
Call the file manager: Press the PGM MGT key
Select the directory in which the graphics file is
saved
Move the cursor to the graphics file
Press the ENT key
The control opens the graphics file in its own
application using the
With the key combination ALT+TAB, you can always
return to the control's user interface while leaving the
graphics file open. Alternatively, you can also click the
corresponding icon in the task bar to switch back to the
user interface of the control.
More information on how to use
Help.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Ristretto additional tool.
is provided in
Ristretto
3
93